Panovf Factory Direct Sales Rock Wool Acoustic Panels Thermal Insulation Building Material

Product Description

Product Description

 

PANOVF® Rock Wool Board is made from basalt, an inorganic raw material.
It is produced by heating basalt at 1350˚C - 1400˚C and centrifuging it at high speed into fibers. Advanced three-dimensional production technology is used. Then, a few binding agents are added, and it is shaped by thermal curing.

It is lightweight and easy to install, mainly used for thermal and acoustic insulation.

Products are widely applied in the insulation of building exterior walls, curtain-wall roofs,
industrial and civil buildings, composite core boards, equipment and pipeline insulation of marine bulkheads, fire-door core boards, and all kinds of industrial or shipbuilding equipment.

Detailed Requirements for Rock Wool Board

ITEM	UNIT	Values
Density	kg/m³	40-200
Length	mm	600-2400
Width	mm	400/600/1200
Thickness	mm	30-200
Note: Normal Size 600X1200mm. Customized production is acceptable.

Product Features

Distinctive Advantages of Rock Wool Insulation Board: 
- Non - combustible, flame-retardant and waterproof.
- Cost - effective, enhancing building energy efficiency.
- Minimizes external sound penetration into the building.
- Absorbs interior echo, ensuring effective sound insulation.
- Offers good thermal efficiency, keeping buildings warm in winter and cool in summer.
- Lightweight, eco - friendly, easy to fabricate on - site and install.
- Long - lasting with a lifetime durability. 

Production Line

Photographed actually in our factory workshop.

Product Parameters

 

Properties		Unit	Density
			40-200kg/m3
Combustion performance		--	Class A1 non-combustion
Mean fiber diameter		um	4.4
Shot content		%	3%
Compression Strength(10%deformation)		kPa	≥40
Hydrophobic rate		%	≥98.0
Melt temperature		ºC	>1000
Acidity ratio		--	≥1.8
Moisture absorption rate		%	≤0.2
Thermal conductivity(average 25ºC)		W(m.k)	≤0.048
Dimensional stability		%	≤1.0
Water absorption(Partial Immersion)		Kg/m2	Short term(24h)≤1.0 Long term(28d)≤3.0
Thickness tolerance		mm	±1
Right angel degree of deviation		mm/m	≤5
Planeness tolerance		mm	≤6
properties after ignition-burning	Shrinkage percentage	%	(750ºC,0.5h)≤8
	Mass loss rate	%	(750ºC,0.5h)≤10

 

Application

Rock wool for Building

The exterior wall insulation thin plastering system is a non-bearing insulation structure. It consists of an insulation layer, a protective layer, and fixing materials such as adhesives and auxiliary fixings. This system is attached to the outer surface of the exterior wall. It offers excellent performance in fire safety, heat insulation, waterproofing, crack resistance, wind pressure resistance, and durability.

Rock wool for industry


Industrial rock wool board has four outstanding features: High temperature resistance, excellent hydrophobicity, high corrosion resistance, and low thermal conductivity. It can provide the highest level of protection against heat and energy loss for industrial equipment in fields like petrochemical, power plants, and industrial tanks. This helps to prevent harmful effects such as fires and noise.
 

Application		Rock Wool Board	Rock Wool Blanket	Rock Wool Bulk
Industry	Boiler, Heating processing equipment, oven	√	√
	Power equipment, flue, chimney	√	√
	Chemical, petrochemical, refining equipment	√	√
	Storage tank	√	√
	Small and medium diameter pipeline		√
	Big diameter pipeline (above 610mm)		√
	Pipeline elbow, valve, flange etc.		√
	Insulation gap filling			√
Building	Building wall acoustic, fireproof	√	√
	Curtain wall acoustic, fireproof	√	√
	Fireproof wall, fireproof door, fireproof filling	√	√
	Elevator shaft acoustic , fireproof	√	√
	Steel structure fireproof spraying			√
	Roof insulation	√	√
Boat	Shipbuilding	√	√

• Our rock wool boards are widely applicable, for internal/cavity walls, external wall insulation/fire barriers, curtain wall insulation, indoor light partition wall insulation, waterproof roofs, color steel sandwich panels, large pipelines and tanks.
• We offer them with or without reinforced foil facings as per your project.

Packaging & Shipping

 

Package and Delivery:

Package size:  120.00cmX60.00cmX100.00cm / customized   Weight: 24KG

Certifications

FAQ

Q: Are you a manufacturer or a trading company?

A: We are a manufacturer founded in 2010, located in Anhui province, China, and our headquarters is in the Shanghai office.

Q: Can you accept neutral packing & OEM ?
A: Yes, we can. But the customer needs to bear the cost of OEM packing.

Q: Can you provide the sample for free ?
A: We can offer FREE SAMPLES. Samples will be sent within 1 - 3 days after the freight payment is confirmed.

Q: What's the lead time?
A: 7-15 days after receipt of advanced payment based on your order quantity

Q: What's the payment term?
A: 30% advance payment and 70% paid before delivery by TT.  For large-value orders, payment by LC is acceptable.

Q: What services can Panovf provide?

A:  * We are a professional manufacturer. Welcome to visit our company and factory at any time!
* We can help you design any packing ideas and put them into production. Customized production is available.
* High quality, reasonable and competitive price, fast lead time.
* All products are strictly quality - checked in-house before packing..

Q: What is Panovf's inspection process for Rock Wool?
A: Raw Material Inspection - Production Process Inspection - Factory Inspection - Parallel Sample Tracking System.
 

Q:  What are the characteristics of Rock wool and Glass wool?
A:  (1) Rock wool can withstand up to 1000°C (1800°F), while fiberglass melts at around 600°C (1100°F).
(2) Rock wool density: 40 - 200 kg/m³ . Glass wool density: 8 - 100 kg/m³.
(3) Rock wool: blanket sizes like 0.6m×5m, 1.2m×5m etc.; board sizes 1.2m×0.6m, 1.2m×2.4m etc.
Glass wool: blanket sizes 1.2m×30m, 1.2m×15m etc.; board sizes 1.2m×0.6m, 1.2m×2.3m etc.
(4) Applications: Rock wool is used in civil, commercial, industrial and agricultural sectors. Glass wool is mainly for civil and commercial buildings.


If any questions, please feel free to contact us!